SEAS 3D
SOP
MATERIALS
EQUIPMENT
STATUS
STATUS
MATERIALS
EQUIPMENT
SOP
MATERIALS
Pricing
VeroWhite
• Printed on: Objet 30
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 250μm
• Layer Height: 28μm
• Isotropic
• Water-tight
• Elongation at Break: 25%
•
More Info
VeroClear
• Printed on: Objet 30
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 150μm
• Layer Height: 16μm
• Isotropic
• Water-tight
• Elongation at Break: 25%
•
More Info
Durus
• Printed on: Objet 30
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 150μm
• Layer Height: 28μm
• Isotropic
• Water-tight
• Elongation at Break: 50%
•
More Info
PLA
• Printed on: Prusa I3 MK3s
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 250μm
• Layer Height: 100μm-300μm
• Anisotropic
• Water permeable
• Ultimate Tensile Strength: 26.4 MPa
•
More Info
Onyx
• Printed on: Onyx One
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 250μm
• Resolution: 50μm
• Layer Height: 100μm-200μm
• Anisotropic
• Water permeable
• Ultimate Tensile Strength: 30 MPa
•
More Info
Formlabs High Temp
• Printed on: Form 3
• Max print size: 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in)
• Minimum recommended feature size: 250μm
• Layer Height: 28μm
• Isotropic
• Water-tight
• Elongation at Break: 3%
•
More Info